Monocoque Tower

Famille de produit

Monocoque Tower

Designed for use with floor rail anchoring, this compact unit requires only 29 in. (737 mm) of floor space inward from the anchoring rail, and leaves plenty of room for working in narrow repair bays. The Monocoque Tower allows two independent pulls to be made simultaneously at heights ranging from 5 in. (127 mm) above floor level to a 6 ft. 6 in. (1.98 m).

Caracteristics

10 ton total pulling power
Works in 12’2” (3.7m) wide work bays
Makes double pulls simultaneously, and the ability to lock out either pull while the other pull continue
tirer continuer
Easy to change pull heights
Pulling at angle to the tail is permitted with the special rail tie-down
Spring loaded rear swivel wheel allows easy movement and positioning of the tower
Pressure monitoring gauge on hydraulic pump
16’ (4.88m) long pulling chain
Uses high grade tempered alloy chain
Equipped with two alloy pull hooks
Extensively tested for strength and functioning
Uses lightweight tempered aluminum pulleys
Quick return springs on hydraulic cylinder
Easy to add “come – along” additional pulling
Engine lift arm available as accessory for upward pulling over the vehicle
Make multi pulls with Back Brace Kit accessory
Quick rail connection with drop pin
All zinc coated for long lasting appearance